|
Order Online or Call Us 972-271-7361

Cart

Your cart is currently empty.

Showing 13 - 24 of 58 result

Show per page

Bio Slide H2O™ concrete form release concentrate
gallon gallon gallon gallon
$55.60

PREMIUM BIODEGRADABLE CONCRETE FORM RELEASE CONCENTRATE

Bio Slide H2O is a premium quality, concentrated, all-natural, biodegradable form oil that facilitates easy removal of concrete structures from forms while minimizing voids, bug holes and form build-up. Designed to be diluted and then fogged or sprayed into concrete forms. Provides up to five times the coverage of oil-type form coatings.

Features

  • All-natural and biodegradable
  • Nonhazardous
  • Extremely low VOCs
  • Easy application
  • No unpleasant smell
  • Will NEVER clog spray equipment
  • Will NEVER stain or discolor
  • Helps ensure the highest quality concrete finishes by minimizing voids and bug holes
Bio Slide™ concrete form release
gallon gallon gallon gallon gallon
$35.65

READY-TO-USE CONCRETE REPELLENT AND FORM RELEASE

BIO SLIDE is a premium quality concrete repellent that prevents concrete from adhering to ready mix trucks and roadworking equipment. BIO SLIDE also facilitates easy removal of concrete structures from concrete forms – minimizing voids, bug holes and build-up. Designed to be applied with a single thin coat, BIO SLIDE is non-staining, reduces waste and increases productivity.

Features

  • Advanced formula
  • Easy application
  • Non-staining; will not stain or discolor
  • No unpleasant odor
  • Will NEVER clog spray equipment
  • Does not wash off with water

Helps ensure the highest quality architectural concrete and decorative concrete finishes by minimizing voids and bug holes Great for concrete ready mix trucks, pumpers, screeds and other paving equipment to prevent adherence and build-up of concrete.

| Tech Sheet |

Blast Off™ concrete remover
gallon gallon gallon gallon
$377.00

FAST-ACTING, ORGANIC CONCRETE AND RUST REMOVER

Blast Off works quickly like an acid to remove dried concrete, but it does so without many of the drawbacks associated with acid-based products. Unlike traditional acid-based products, Blast Off will not harm most paints, rubber or plastic, and it does not give off harmful fumes. It's much gentler on your equipment and drivers too!

Features

  • High potency formula dissolves concrete, mortar, calcium, lime and scale and rust

  • No smoke, no fumes – can be used indoors

  • Contains no hydrofluoric, glycolic, sulfuric or phosphoric acids

  • Will not harm most vehicle paints, decals, wiring or hoses

  • Also effective for removing rust.

Speed: fast | Removes: 1/8" | Indoor Safe: non-fuming

Tech Sheet |

Boat Bath wash and shine boat soap
gallon gallon gallon gallon gallon
$15.25

SUPER-CONCENTRATED, pH NEUTRAL BOAT WASH & SHINE SHAMPOO

Boat Bath is a super-concentrated cleaner designed to provide superior detergency while at the same time being extremely gentle on all boat and yacht finishes. Boat Bath contains special rinsing agents that enhance shine and help eliminate streaking.

Features

  • Specially formulated to gently clean all types of flying, rolling and floating stock
  • Neutral pH cleaner that is ideal for everyday use
  • Safe to use on exotic materials such as plexiglass, carbon fiber, etc.
  • Creates a luxuriant, sudsy foam to break up grease, grime and gently lift away dirt
  • More shine with less streaks
  • Environmentally preferable non-butyl product containing biodegradable surfactants and zero VOCs
  • The perfect everyday wash for vehicles of all sorts, including cars, motorcycles, boats, RVs and airplanes
The ideal cleaning compliment for boats protected with RejeX®, Xtreme Finish™ or Aero-Glide™. For heavier soils and degreasing, or for removing diesel soot from transoms and exhaust stacks, use Corrosion Technologies' Xtreme Clean™.
Boot Klean™
oz gallon
$25.45

PNEUMATIC DE-ICING BOOT CLEANER

Boot Klean is a highly sophisticated addition to Corrosion Technologies' Aviation line of aircraft maintenance and detailing products. Boot Klean cleans rubber de-ice boots and removes old sealants quickly and easily. Simply apply the product with a scrub sponge, allow the product to penetrate for 2-3 minutes, agitate with the scrub sponge and rinse. Once cleaned, the boots will be flat black.

Follow up cleaning your boots with a treatment of Corrosion Technologies' Boot Sealant for a long-lasting, glossy finish that protects your de-icing from fading.

$50.95

PNEUMATIC DE-ICING BOOT SEALANT, UV AND WEAR PROTECTANT

Boot Sealant is Step 2 in maintaining and properly protecting the surface of pneumatic de-icing boots. Corrosion Technologies Boot Sealant prevents drying and cracking by sealing and protecting de-ice boots from harmful UV rays.

Simply apply Boot Sealant to your de-icing boots with a soft cloth, and when dry, Boot Sealant stays slick and shiny for months! To prepare your de-ice boots for a treatment of Boot Sealant, it is important to first clean them and remove old, residual sealant by using Corrosion Technologies' Boot Klean™.

Bore Cleaner
oz oz oz oz gallon
$3.99

GET A CLEANER WEAPON WITH FEWER HEADACHES

Corrosion Technologies Bore Cleaner safely and efficiently removes every component of multi-layered bore buildup, including hydrocarbon resins, dust and dirt, salts, minerals, carbon and soft metal fouling.  Bring pistol, shotgun and rifle (even black powder rifle) actions, bores and barrels back to mirror brightness with less picking, scraping and scrubbing.

Although Bore Cleaner is aggressive on gunk and fouling, it is completely safe on polymers, varnishes, soft metals, and metal alloys, bluing, anodizing and all other known gun finishes.

Odorless and crystal clear, so you can easily see fouling and contaminants on the patch to know when your firearm is perfectly clean. 

CorrosionX®
aerosol aerosol spray gallon gallon gallon gallon
$10.90

KILLS RUST AND CORROSION

WORLD'S GREATEST LUBRICANT, PENETRANT & ANTI-SEIZE

SAFE ON ELECTRONICS

CorrosionX is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! Although it may look like a typical oil-based anti-corrosion spray, CorrosionX utilizes revolutionary Polar Bonding™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. CorrosionX actually kills existing rust and corrosion (keeping it from spreading), and provides long-term protection against rust and corrosion on any metal surface.

CorrosionX is the only product readily available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement MIL-PRF-81309H.

Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum. In other words, as long as CorrosionX is present on metal, it can't rust or corrode! CorrosionX also has a dielectric characteristic, so it's safe on electronics and completely shuts down electrolysis between dissimilar metals. Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, gensets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments.

A Breakthrough Lubricant

CorrosionX's unique formulation offers a multitude of advatages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants.
Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication. It is ideal for fishing reels and firearms.

An Unbeatable Penetrant

CorrosionX also penetrates faster and further than anything you've ever used. Corroded or rusted nuts, bolts or fittings can usually be disassembled within a few minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service. Watch this time lapse video closely! Due to it's unique Polar Bonding characteristic, CorrosionX is such an incredible penetrant that it will defy gravity and climb straight up this 3" bolt!!

Safe On Electronics

Water and electronics don't mix. Until now, there haven't been many options for protecting or restoring electronics from moisture intrusion. CorrosionX's unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though the CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals, and a mission critical product for drones and all Remote Control hobbyists.

Minimal Environmental Impact Product

The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is many times more gentle on you, your equipment and the environment.

Learn More | Brochure | Product Data Sheet
$7.10

KILLS RUST AND CORROSION

WORLD'S GREATEST LUBRICANT, PENETRANT & ANTI-SEIZE

IMPERVIOUS TO THE MOISTURE PREVALENT IN PNEUMATIC EQUIPMENT

CorrosionX is now available with a precision tip for pinpoint application as well as conveniently refilling in-line oilers. CorrosionX's unique Polar Bonding technology kills and prevent corrosion, provides unmatched long-lasting lubrication and is impervious to the moisture prevalent in pneumatic tools and equipment.

  • Unbeatable lubrication and wear protection for all air-operated tools, equipment and fittings
  • Kills rust and prevents it from forming
  • Resists oxidation and foaming
  • Prevents tools from freezing / needs no separate antifreeze
  • Makes rusted components perform like new
  • Greatly extends equipment service life

Corrosion Protection and Rust Preventive Coating

Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum. In other words, as long as CorrosionX is present on metal, it can't rust or corrode!

CorrosionX also has a high dielectric property, so it's safe around electric tools and completely shuts down electrolysis between dissimilar metals.

To learn more about Polar Bonding, please visit our technology page.

A Breakthrough Lubricant

CorrosionX's unique formulation offers a multitude of advantages over conventional air tool lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or the moisture in pneumatic tools. It lubricates under extreme loads and high temperatures, and it helps prevent tools freezing at low temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in high humidity, coastal and marine environments where higher level of moisture inside air compressors, air lines and pneumatic tools can displace ordinary lubricants.

Minimal Environmental Impact Product

The volatile organic compounds (usually abbreviated as VOC or VOCs) contained in CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is many times more gentle on you, your equipment and the environment.

Learn More | Brochure | Product Data Sheet

CorrosionX® Aviation
aerosol spray gallon gallon gallon gallon
$18.75

MIL SPEC AVIATION CORROSION PREVENTON & CONTROL COMPOUND

MIL-PRF-81309H Type II (current)
MIL-PRF-81309G Type II (thru 2018)

MIL-PRF-81309F Type II (thru 2014)
MIL-C-81309E Type II (thru 2005)
Boeing Part No.: RMO 16679
Pratt & Whitney Part No.: PWC15-011
Cessna Spec: CSNP038, Type 9A

CorrosionX® Aviation takes corrosion control to a whole new level! Featuring the latest advances in Polar Bonding and Fluid Thin Film Coating (FTFC) technologies, CorrosionX Aviation is specially formulated to displace moisture, stop corrosion instantly and provide long-lasting protection. Made entirely in the USA, CorrosionX Aviation is qualified under MIL-PRF-81309 Rev. H Type II (replaces and supersedes MIL-PRF-81309G, MIL-PRF-81309F and MIL-C-81309E) for corrosion prevention and control on airframes — and now, general purpose use as well.

Used extensively by the U.S. military as well as NATO forces, all CorrosionX products and application equipment have been assigned National Stock Numbers (NSN) by the General Services Agency (GSA) and are available for procurement through the Defense Logistics Agency (DLA). Corrosion X is the only product available to the public that meets the US Navy's tough new corrosion prevention and control performance requirement ( MIL-PRF-81309H ).

Features

  • Kills and prevents corrosion
  • Long-lasting Polar Bonding Technology
  • U.S. military proven to be more than 2X more effective* than other airframe corrosion prevention and control products
  • Displaces moisture
  • Penetrates and lubricates
  • Self-curing Fluid Thin Film Coating (FTFC) technology
  • Effective on all metals
  • Safe on electronics
  • Contains no waxes or silicones

Aviation Applications

Apply to airframe interiors, battery terminals, hinges, cables, wheel hubs, rotor heads and trim drum actuators. Ideal for exhaust and turbocharger components. It may also be applied to electrical and avionic components such as micro switches, cannon plugs, antenna bases, circuit breakers and buss bars. 

Minimal Environmental Impact Product

As of 2017, the volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX Aviation has been reduced to ZERO. Compare that to other common airframe corrosion inhibitors, which can contain as much as 58% VOC*.

Learn More | Brochure | Product Data Sheet

*Source: 2004 Joint Council on Aging Aircraft National Strategy Synopsis Briefing
CorrosionX® Extended Duty
aerosol spray gallon gallon gallon gallon
$18.45

KILLS RUST AND CORROSION
EXTENDED WATER / WEATHER RESISTANCE
SAFE ON ELECTRONICS

CorrosionX® Extended Duty (also know as CorrosionX XD) is a medium build (thickened) version of CorrosionX®. The higher viscosity offers longer-term resilience against displacement of removal by splash or spray. CorrosionX XD penetrates existing rust and corrosion, displaces moisture and prevents electrolysis. It leaves a non-hardening, self-healing coating for maximum protection against moisture intrusion, while providing outstanding, long-lasting lubrication for all moving parts. Performs on already wet and corroded surfaces as well. 

Being thinner than CorrosionX® Heavy Duty, XD can be easily atomized using Corrosion Technologies' Handi-Spray™ application systems. As a medium-build film, CorrosionX Extended Duty does not accumulate dust and dirt like grease does.

CorrosionX XD contains no wax, tar or silicone, and unlike wax coatings, will not dry, harden or crack under stress. Safe on point, glass, gelcoat, wiring insulation, most rubber, plastics and electronics.

Designed to withstand extreme corrosive environments including sulphuric and direct saltwater spray.

Learn More |

CorrosionX® Grease
tube gallon gallon gallon
$14.50

EXTREME PERFORMANCE NLGI II GREASE

CorrosionX is now available in a high performance, multi-purpose, extreme pressure rated NLGI #2 grade premium grease. Suitable for the toughest marine environments, CorrosionX® Grease thrives where other products fail. We know of no finer product available on the market today.

Engineered for maximum shear stability, film strength and heavy shock-load performance, CorrosionX Grease offers unsurpassed wear and extreme pressure protection.

CorrosionX Grease is the product of choice for automotive and extreme pressure applications in marine, construction, mining, agricultural, logging and hauling industries. Choose CorrosionX Grease for your most demanding applications.

Features

  • Polar Bonding technology inside
  • Premium base oils provide proven oxidation resistance, unsurpassed performance in marine and freshwater environments.
  • Over-based calcium sultanate complex thickener maximizes pumpability, water resistance and high drop point.
  • Superior anti-wear additives lubricate and prevent wear.
  • Synergistic corrosion inhibitors protect against rust and corrosion.
  • Advanced extreme pressure additive package handles high carrying and shock load.
Tech Sheet |
translation missing: en.general.search.loading