|
Order Online or Call Us 972-271-7361

Cart

Your cart is currently empty.

Showing 1 - 12 of 22 result

Show per page

Search

5 Star Foam multi-surface foaming cleaner
Soldout
$13.49

MULTI-SURFACE INTERIOR / EXTERIOR SPRAY AND WIPE FOAMING CLEANER

5 Star Foam™ rates as the absolute finest foaming cleaner in the industry! 5 Star Foam is for use on interior smudge marks, nicotine stains, oily fingerprints and food stains. On aircraft exteriors, 5 Star Foam will effectively clean carbon exhaust, oil and bugs. It can also be used on vinyl, leatherette, plastic, sinks, enameled, varnished and similar surfaces. 5 Star Foam was designed specially for hard to remove grease and soil unaffected by other cleaners. Its clinging foam permits long-lasting contact with irregular, as well as plain, surfaces to be cleaned. Its high pressure spray enables it to reach hard-to-get-to trouble spots.

Meets or exceeds the scope and performance requirements of MIL-C-878937 Type II
Passes ASTM-F-484 Type A Stress Crazing Of Acrylic Plastic
Suitable for use on BOEING LEXAN 9600 and GE-MR5 LEXAN
Passes ASTM F502, Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

RECOMMENDED FOR USE ON:

  • Aircraft and boat exteriors
  • Tile
  • Sinks
  • Tubs
  • Stainless Steel
  • Vinyl
  • Plastic Surfaces
$10.95

CARPET SPOT AND STAIN REMOVER

5 Star Stain Remover™ was formulated to be a powerful, easy-to-use carpet and cloth stain remover. It's the quick and easy solution for removing grease, oil and ground-in dirt.

  • May be used on most types of carpet
  • Excellent for pre-treating stains prior to carpet shampooing
  • Add to your existing carpet shampoo to boost cleaning power
  • Contains biodegradable surfactants
  • Will not harm plastic


    RECOMMENDED FOR USE ON:

    • Car and truck carpet
    • Commercial carpet cleaning
    • Pretreating high traffic area soils
    • Removing grease and oil spots
    • Tough stains like red wine and cofee


    ALuma Brite aluminum cleaner
    1 gallon 20 gallon 30 gallon 55 gallon
      $25.95
      1 gallon 20 gallon 30 gallon 55 gallon

        ALUMINUM CLEANER, BRIGHTENER AND OXIDATION REMOVER 

         ALuma Brite™ is a special formulation of surface cleaners and acid designed to restore aluminum to a bright, clean appearance.

        Features

        • Removes oxidation to restore a bright, clean aluminum finish
        • Controlled rate of etching helps prevent streaking when working with large aluminum surfaces
        • Easily removes concrete, exhaust soot and road film
        • High foaming / clean rinsing formula.

        Tech Sheet | SDS

        $7.49

        KILLS RUST AND CORROSION

        WORLD'S GREATEST LUBRICANT, PENETRANT & ANTI-SEIZE

        IMPERVIOUS TO THE MOISTURE PREVALENT IN PNEUMATIC EQUIPMENT

        CorrosionX® is now available with a precision tip for pinpoint application as well as conveniently refilling in-line oilers. CorrosionX's unique Polar Bonding technology kills and prevent corrosion, provides unmatched long-lasting lubrication and is impervious to the moisture prevalent in pneumatic tools and equipment.

        • Unbeatable lubrication and wear protection for all air-operated tools, equipment and fittings
        • Kills rust and prevents it from forming
        • Resists oxidation and foaming
        • Prevents tools from freezing / needs no separate antifreeze
        • Makes rusted components perform like new
        • Greatly extends equipment service life

        Corrosion Protection and Rust Preventive Coating

        Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum. In other words, as long as CorrosionX is present on metal, it can't rust or corrode!

        CorrosionX also has a high dielectric property, so it's safe around electric tools and completely shuts down electrolysis between dissimilar metals.

        To learn more about Polar Bonding, please visit our technology page.

        A Breakthrough Lubricant

        CorrosionX's unique formulation offers a multitude of advantages over conventional air tool lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or the moisture in pneumatic tools. It lubricates under extreme loads and high temperatures, and it helps prevent tools freezing at low temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in high humidity, coastal and marine environments where higher level of moisture inside air compressors, air lines and pneumatic tools can displace ordinary lubricants.

        Minimal Environmental Impact Product

        The volatile organic compounds (usually abbreviated as VOC or VOCs) contained in CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is many times more gentle on you, your equipment and the environment.

        Learn More | Brochure | Product Data Sheet

        CorrosionX Extended Duty
        16 oz aerosol 16 fl oz trigger spray 1 gallon 5 gallon 30 gallon 55 gallon
          $19.99
          16 oz aerosol 16 fl oz trigger spray 1 gallon 5 gallon 30 gallon 55 gallon

            KILLS RUST AND CORROSION
            EXTENDED WATER / WEATHER RESISTANCE
            SAFE ON ELECTRONICS

            CorrosionX® Extended Duty (also know as CorrosionX XD) is a medium build (thickened) version of CorrosionX®. The higher viscosity offers longer-term resilience against displacement of removal by splash or spray. CorrosionX XD penetrates existing rust and corrosion, displaces moisture and prevents electrolysis. It leaves a non-hardening, self-healing coating for maximum protection against moisture intrusion, while providing outstanding, long-lasting lubrication for all moving parts. Performs on already wet and corroded surfaces as well. 

            Being thinner than CorrosionX® Heavy Duty, XD can be easily atomized using Corrosion Technologies' Handi-Spray™ application systems. As a medium-build film, CorrosionX Extended Duty does not accumulate dust and dirt like grease does.

            CorrosionX XD contains no wax, tar or silicone, and unlike wax coatings, will not dry, harden or crack under stress. Safe on point, glass, gelcoat, wiring insulation, most rubber, plastics and electronics.

            Designed to withstand extreme corrosive environments including sulphuric and direct saltwater spray.

            Learn More |

            CorrosionX Grease
            15 oz tube Case of twelve 15 oz tubes in display box 35 lb keg (5 gallon) 120 lb keg (16 gallon) 400 lb keg (55 gallon)
              $12.49
              15 oz tube Case of twelve 15 oz tubes in display box 35 lb keg (5 gallon) 120 lb keg (16 gallon) 400 lb keg (55 gallon)

                EXTREME PERFORMANCE NLGI II GREASE

                CorrosionX is now available in a high performance, multi-purpose, extreme pressure rated NLGI #2 grade premium grease. Suitable for the toughest marine environments, CorrosionX® Grease thrives where other products fail. We know of no finer product available on the market today.

                Engineered for maximum shear stability, film strength and heavy shock-load performance, CorrosionX Grease offers unsurpassed wear and extreme pressure protection.

                CorrosionX Grease is the product of choice for automotive and extreme pressure applications in marine, construction, mining, agricultural, logging and hauling industries. Choose CorrosionX Grease for your most demanding applications.

                Features

                • Polar Bonding technology inside
                • Premium base oils provide proven oxidation resistance, unsurpassed performance in marine and freshwater environments.
                • Over-based calcium sultanate complex thickener maximizes pumpability, water resistance and high drop point.
                • Superior anti-wear additives lubricate and prevent wear.
                • Synergistic corrosion inhibitors protect against rust and corrosion.
                • Advanced extreme pressure additive package handles high carrying and shock load.
                Tech Sheet |
                CorrosionX Heavy Duty
                12 oz aerosol 1 gallon 5 gallon 30 gallon 55 gallon
                  $17.95
                  12 oz aerosol 1 gallon 5 gallon 30 gallon 55 gallon

                    XTREME PROTECTION FROM RUST AND CORROSION

                    CorrosionX® Heavy Duty (also widely known as CorrosionX HD) is a high performance thickened-film version of CorrosionX®. It was developed specifically to provide maximum protection against moisture intrusion and the resulting rust and corrosion.

                    CorrosionX Heavy Duty is dripless and resists displacement or removal by splash, rain, seawater or even pressure washing. It is ideal for long-term protection against serious rust and corrosion assault and in situations where the surface being protected is exposed directly to the elements. Unlike wax-based corrosion inhibitor barrier coatings, CorrosionX HD will not dry, harden or crack. The coating is self-healing and will slowly penetrate existing rust and corrosion, displacing moisture and corrosion-causing electrolytes.

                    Features

                    • Extreme protection for exposed metal in the most challenging conditions, such as marine, industrial and agricultural applications
                    • Long-term water and weather resistance
                    • Dripless
                    • Tenaciously resists water displacement and washout
                    • Will not dry, harden or crack
                    • Actively prevents electrolysis and galvanic corrosion
                    • Self-healing, resilient film

                    For those really tough jobs where you need the ultimate protection against moisture, the answer is CorrosionX Heavy Duty. There is no other product like it on the market today. Pretreat fittings for easy dismantling even years later! Recommended for use on boat trailers by Field and Stream magazine.

                    National Stock Numbers

                    • CorrosionX Heavy Duty 12 oz aerosol NSN 8030-01-438-4064
                    • CorrosionX Heavy Duty 1 gallon NSN 8030-01-438-4096
                    • CorrosionX Heavy Duty 5 gallon NSN 8030-01-438-4100
                    • CorrosionX Heavy Duty 30 gallon NSN 8030-01-438-4108
                    • CorrosionX Heavy Duty 55 gallon NSN 8030-01-438-4060

                    Brochure | Tech Sheet | Product Data Sheet
                    General Carbon-Off non-butyl cleaner and degreaser
                    1 gallon 5 gallon 20 gallon 30 gallon 55 gallon
                      $27.50
                      1 gallon 5 gallon 20 gallon 30 gallon 55 gallon

                        AIRCRAFT SURFACES CLEANER / NON-BUTYL DEGREASER
                        MEETS BOEING D6-17487 REVISION R

                        The commander-in-chief of aircraft surfaces cleaners, General Carbon-Off™ leads the war on exhaust soot, belly grime and bug splats! Let General Carbon-Off send those nasty V.O.C.s and butyl cleaners into exile – never to be seen again! And guess what comrade, General Carbon Off is completely water-soluble and is nonflammable! It will not harm most painted surfaces, decals, rubber, insulation, plastics or wiring.

                        Features

                        • Powerful non-butyl degreaser
                        • Breaks up and removes tough exhaust stains
                        • Great for general-purpose cleaning
                        • Low VOC formula saves hours of cleanup time
                        Ground Glue Dust & Gravel
                        5 gallon 55 gallon 265 gallon tote
                          $89.99
                          5 gallon 55 gallon 265 gallon tote

                            SUPER-CONCENTRATED, LONG-LASTING DUST SUPPRESSANT

                            Ground Glue™ Dust & Gravel is a long-lasting dust control and stabilization (i.e increasing the weight bearing capabilities, reducing erosion, etc.) product for rock and gravel paths, drives and roads. The most economical product in the Ground Glue lineup, Ground Glue Dust & Gravel is a high-grade, hydroscopic compound that attracts moisture from the air and then absorbs it into the road surface. Once in the road, Ground Glue Dust & Gravel resists evaporation, encumbers dust, binds dirt together and stabilizes gravel – all while reducing maintenance and watering costs.

                            Ground Glue Dust & Gravel “glues” fine dust and aggregates to keep surfaces stable and dust-free. Effective on most soil and gravel types.

                            Features

                            • Immediate impact: Begins controlling dust now
                            • Surface treatment – no mixing with soil or compaction required
                            • Concentrated – dilutes with water up 10X
                            • Contains no asphalt or hydrocarbons; environmentally preferred
                            • Economical and long-lasting; effectiveness increases over time
                            • Ideal for gravel road maintenance – fixes fines into the base to form a foundation for the gravel
                            • Contains anti-scale and corrosion inhibitor additives
                            • Will not harm application equipment
                            • Self-cleaning formula – just rinse to leave application equipment clean

                              Coverage for Dust Suppression 5 gallon jug 55 gallon drum 265 gallon tote
                              Short Term (1-2 weeks) 60,000 sq. ft 660,000 sq. ft 3,180,000 sq. ft
                              3 months (seasonal) 30,000 sq. ft 330,000 sq. ft 1,590,000 sq. ft
                              6 months (biannual) 15,000 sq. ft 165,000 sq. ft 795,000 sq. ft
                              1 year 7,500 sq. ft 82,500 sq. ft 397,500 sq. ft

                               

                              Dust Suppression
                              Application Calculator

                              To determine how much Ground Glue Dust & Gravel you'll need for your dust suppression application, simply measure the length and width of the area you are going to treat (in feet), and then enter the length of time (in weeks) that you want the application to last. For example, if you want the application to last for a season, key in 13. If you want it to last for the maximum of one whole year, enter 52.

                              Gravel Surface
                              Application Calculator

                              To determine how much Ground Glue Dust & Gravel you'll need for your gravel road, parking lot, etc., simply measure the length and width of the area you are going to treat (in feet), then measure the average depth of the gravel bed (in inches), and then enter the length of time (in weeks) that you want the application to last. For example, if you want the application to last for a season, key in 13. If you want it to last for the maximum of one whole year, enter 52. NOTE: Because of the wide variance in surface area, some gravel types may require more or less product than calculated. Please review the Application Sheet for details.

                              Number of gallons required: 0

                              Number of gallons required: 0

                               

                              Application Guide |

                              Ground Glue Soil Stabilizer
                              5 gallon (treats 360 sq. ft) 55 gallon (treats 3,960 sq. ft) 265 gallon (treats 19,080 sq. ft)
                                $84.95
                                5 gallon (treats 360 sq. ft) 55 gallon (treats 3,960 sq. ft) 265 gallon (treats 19,080 sq. ft)

                                  CONCENTRATED SOIL STABILIZER

                                  Ground Glue™ Soil Stabilizer is an economical, long-lasting soil stabilizer and dust suppressant that assists in compaction of soil, prevention of erosion, and virtually eliminating dust – all while minimizing maintenance and watering costs. Effective on most soil types, Ground Glue Soil Stabilizer binds dirt together while sealing the pores of substrates to greatly increase its bearing capacity and its ability to resist both chemical and natural erosion.

                                  Ground Glue Soil Stabilizer is also available by the tanker load (approx. 4,700 gal.), and includes professional application on your site. Please call 1-800-638-7361 for pricing and scheduling.

                                  Features

                                  • Environmentally friendly & biodegradable
                                  • Economical & long-lasting (with proper preparation, one application will last for years)
                                  • Concentrated
                                  • Assists in compaction
                                  • Works on all soil types except sand and clay (Call us for those soil types)

                                    Tech Sheet |

                                    Handi-Spray Application Systems
                                    Belt Pak (basic) Belt Pak (aviation) Belt Pak (NAVAIR) 5 gallon (basic) 5 gallon (aviation) 1" Cricket Wand 5" Hook Wand 3' Superflex Wand 3' 360° Wand 6' Fan Spray Wand 8' 360° Wand
                                      $759.00
                                      Belt Pak (basic) Belt Pak (aviation) Belt Pak (NAVAIR) 5 gallon (basic) 5 gallon (aviation) 1" Cricket Wand 5" Hook Wand 3' Superflex Wand 3' 360° Wand 6' Fan Spray Wand 8' 360° Wand

                                        FOR APPLICATION OF CORROSIONX®, NAVGUARD® AND OTHER LIQUIDS

                                        The Handi-Spray™ application systems were designed to atomize CorrosionX, CorrosionX® Aviation, CorrosionX® Extended Duty, NavGuard and other liquids into an incredibly fine, smoke-like fog. This fine atomization converts low and medium viscosity liquid products into micro-droplets, which stay suspended in the air for an extended period of time. This degree of atomization is key for achieving the most cost-effective and thorough application of corrosion preventative compounds into airframes and other irregularly shaped enclosures where direct application is not practical (e.g. around blind corners, unreachable areas, etc.).

                                        For example: When properly fogged into an enclosed area like an airplane wing, the suspended CorrosionX Aviation vapor will entirely fill the void of an enclosed area and deposit a light coating of the product on every surface. This allows CorrosionX Aviation to go around blind corners, to treat the back sides of spars and to penetrate into lap seams and other areas that cannot be sprayed directly

                                        In contrast, although overspraying and saturating an airframe using a common pump-up will usually not cause any damage, it will cause CorrosionX to drip and weep for longer than it needs to (not to mention wasting money by using excess product). The Handi-Spray systems will spray CorrosionX Heavy Duty nicely, but they are not able to atomize Heavy Duty as it is too thick to "fog".

                                        Used extensively by the U.S. military as well as NATO forces, all CorrosionX products and Handi-Spray application equipment have been assigned National Stock Numbers (NSN) by the General Services Agency (GSA) and are available for procurement through the Defense Logistics Agency (DLA).

                                        System Configurations

                                        • BeltPak Basic System includes: 1" Cricket Wand, 5" Hook Wand and 3' Superflex
                                        • NAVAIR System includes: 1" Cricket Wand, 5" Hook Wand and 3' 360° Wand
                                        • 5 Gallon Basic System includes: 1" Cricket Wand, 3' 360° Wand and 3' Superflex
                                        • Aviation Systems include all six wands.


                                          Official Treatment Centers

                                          Corrosion Technologies has established an extensive network of CorrosionX Aviation Aircraft Treatment Centers that offer CorrosionX treatments as a customer service. Trained mechanics use special equipment to reach all compartments and difficult-to-access areas of the aircraft. Upon completion of the treatment, a special sticker attesting to the treatment is placed in the customer's logbook. Currently, there are more than 200 Treatment Centers operating throughout the United States and in several foreign countries.

                                          Click here to find an Official CorrosionX Aviation Treatment Center.

                                          Brochure | Owners Manual

                                          KB Plus heavy-duty, concentrated fleet cleaner
                                          55 gallon 330 gallon
                                            $649.00
                                            55 gallon 330 gallon

                                              KB Plus™ is a heavy-duty, concentrated cleaner and surface brightener designed for maximum performance in cleaning trucks and other equipment in concrete-related industries. It will remove concrete film, rust, road grime, dust, and other soils. KB Plus is strong enough for the toughest jobs, yet is economical and easy to use. KB Plus is an acid-based product, however, its non-fuming formula reduces the harmful effects of harsher muriatic acids while still doing a great job of removing concrete and making your vehicles look great.

                                              Features

                                              • Removes concrete films
                                              • High potency formula, can be used indoors
                                              • No smoke, no fumes
                                              • Washes away road grime, dust and soils
                                              • Non-flammable
                                              • Eliminates rust stains
                                              • Contains no hydrochloric, hydrofluoric, glycolic or sulfuric acids
                                              • Compatible with most vehicle paints, decals, wiring and hoses

                                                Tech Sheet |

                                                translation missing: en.general.search.loading