Order Online or Call Us 972-271-7361


Your cart is currently empty.

Showing 1 - 3 of 3 result

Show per page



6 oz aerosol 16 oz aerosol 16 fl oz trigger spray 1 gallon 5 gallon 30 gallon 55 gallon
    6 oz aerosol 16 oz aerosol 16 fl oz trigger spray 1 gallon 5 gallon 30 gallon 55 gallon




      CorrosionX® is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! Although it may look similar to other oil-based anti-corrosion sprays, CorrosionX utilizes revolutionary Polar Bonding™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. CorrosionX actually disrupts rust and corrosion on the molecular level (displacing it from the metal surface and keeping it from spreading), and provides long-term protection against rust and corrosion on any metal surface.

      CorrosionX is the only product readily available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement MIL-PRF-81309H.

      Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum, which are highly resistant to oxidation. CorrosionX also has a dielectric characteristic, so not only is it safe on electronics, CorrosionX shuts down electrolysis between dissimilar metals. Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, gensets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments.

      A Breakthrough Lubricant

      CorrosionX's unique formulation offers a multitude of advantages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants.
      Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication.

      An Unbeatable Penetrant

      CorrosionX penetrates faster and further than any penetrating fluid you've ever used! Corroded or rusted nuts, bolts or fittings can usually be disassembled within minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service.

      Safe On Electronics

      Water and electronics don't mix. Until now, there haven't been many options for protecting or restoring electronics from moisture intrusion. CorrosionX's unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals, and a mission critical product for drones and all Remote Control hobbyists.

      Minimal Environmental Impact Product

      The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is gentler on you, your equipment and the environment.

      National Stock Numbers

      • CorrosionX 6 oz aerosol NSN 8030-01-437-5222
      • CorrosionX 16 oz aerosol NSN 8030-01-437-5227
      • CorrosionX 16 fl oz trigger spray NSN 8030-01-437-5687
      • CorrosionX 1 gallon NSN 8030-01-437-5224
      • CorrosionX 5 gallon NSN 8030-01-437-5233
      • CorrosionX 30 gallon NSN 8030-01-437-4114
      • CorrosionX 55 gallon NSN 8030-01-438-4112

      Trigger Spray Spray Pattern (stream only)

      Learn More | Brochure | Product Data Sheet
      CorrosionX Ultimate CLP cleaner lubricant and protectant for firearms
      1 fl oz 4 fl oz 6 oz aerosol 16 fl oz trigger spray 1 gallon
        1 fl oz 4 fl oz 6 oz aerosol 16 fl oz trigger spray 1 gallon

          CorrosionX® is the ultimate cleaner, lubricant and protectant for firearms of all kinds and in all conditions: black powder, high-volume semi / full-auto fire, suppressed weapons, concealed carry, extreme hot / cold / dirt / wet outdoor environments, and when going for long periods of time between cleaning and lubricating is required.

          CorrosionX employs a revolutionary technology called Polar Bonding that causes it to bond molecularly to any metal surface (and subsurface) that can oxidize. This unique chemistry provides several benefits over conventional CLPs.


          • Cuts through stubborn fouling for easier, more thorough cleaning
          • Prevents powder fouling, primer salts and metal particles from adhering to bore
          • Sticks to metal like a magnet, so it cannot be displaced by moisture, friction or extreme pressures
          • Lubricates better and longer than other gun oils – virtually eliminating wear and providing flawless action
          • 3X the anti-wear protection of MilSpec CLPs
          • Nearly 2X the load carrying capacity of Mil Spec CLPs
          • Kills corrosion and prevents rust – even in the rain!

          CorrosionX Ultimate CLP Trigger Spray Pattern

            Learn More | Brochure | Product Data Sheet
            Bore Cleaner
            1 fl oz 4 fl oz 16 fl oz 32 fl oz 1 gallon
              1 fl oz 4 fl oz 16 fl oz 32 fl oz 1 gallon


                Corrosion Technologies Bore Cleaner safely and efficiently removes every component of multi-layered bore buildup, including hydrocarbon resins, dust and dirt, salts, minerals, carbon and soft metal fouling.  Bring pistol, shotgun and rifle (even black powder rifle) actions, bores and barrels back to mirror brightness with less picking, scraping and scrubbing.

                Although Bore Cleaner is aggressive on gunk and fouling, it is completely safe on polymers, varnishes, soft metals, and metal alloys, bluing, anodizing and all other known gun finishes.

                Odorless and crystal clear, so you can easily see fouling and contaminants on the patch to know when your firearm is perfectly clean. 

                translation missing: en.general.search.loading