Corrosion Technologies has been a trusted resource for the general aviation community, as well as airframe manufacturers and the U.S. armed forces, for over two decades. Our flagship product, CorrosionX® Aviation, has evolved over time with the ever increasing demands for better corrosion control measures in the aviation industry. Today, CorrosionX is the only product available to the general public that meets the U.S. Navy's tough, new performance requirement for corrosion prevention and control ( MIL-PRF-81309H ).
As part of the ongoing commitment to support the U.S. military's corrosion prevention and control program, in 2003, Corrosion Technologies introduced RejeX® to prevent military jet turbine exhaust from damaging aircraft paint.
More recently, Corrosion Technologies has expanded its line of aviation products to include:
- Corrosion Prevention and Control
- Aircraft Surface Cleaners
- Belly Degreaser
- Wax, Acryloid and Polymer-based protective coatings.
Corrosion Prevention and Control
CorrosionX Aviation is the most trusted and proven corrosion prevention and control material in the world today, and is the only consumer product that currently meets the U.S. military's tough, new MIL-PRF-81309H Type II performance requirement. Currently approved by all major airframe manufacturers and recommended by the Joint Council on Aging Aircraft (JCAA), whose testing proved it to be more than twice as effective as any other product in its class.
Developed as a joint venture between Naval Air Systems Command and Corrosion Technologies, NavGuard provides an environmentally-responsible alternative to the toxic, heavy, opaque coatings that have dominated corrosion control in commercial aviation since the 1960s. Does not penetrate or migrate like CorrosionX. Meets MIL-PRF-81309F Type I (Type I is Type with Mildew Inhibitor) and Type II and Type IV.
Corrosion Technologies' Handi-Spray Application Systems were developed to atomize CorrosionX and other liquids into a super-fine coating. These systems are very economical, simple to use and are 100% Guaranteed against defects and workmanship for life. Systems come with assortment of wands for fogging material into wings, flaps, ailerons and other hard-to-reach spaces. Powered by 2-3 cubic feet per minute of shop air at 80 psi.
Aircraft Surface Cleaners and Degreasers
N'viro Solve is a bio-based organic cleaner made from various plant and fruit derivatives. This naturally occurring degreaser removes baked-on oil deposits, as well as heavy grease, from painted or unpainted surfaces. N'viro Solve will take the place of volatile solvent cleaners sometimes used for this purpose.
Xhaust & Soot Remover is a powerful, concentrated, multipurpose aircraft cleaner / degreaser was specifically formulated to clean the toughest exhaust soot, belly grime and bug splats – all while being gentle on all aircraft surfaces. Meets BOEING D6-17487 REVISION R
Pro Wash RX is a super-concentrated, pH balanced, premium shine-enhancing soap designed to provide superior detergency while at the same time being extremely gentle on all vehicle ﬁnishes. Pro Wash RX contains special rinsing agents that help eliminate spotting and streaking.
Mr. Detail is an instant detailer (i.e. one-step cleaner and shine booster) that returns aircraft, boats, cars, RVs and motorcycles to that 'just detailed' look between regular washing and waxing (or RejeX-ing). Quickly and easily removes dust, road film, fingerprints, streaks and water spots safely from most vehicle surfaces.
Xtreme Finish is a specially formulated, carnauba-enriched professional quality waterless dry wash designed to clean and provide short-term, high gloss protection for vehicle finishes – all in one step! Xtreme Finish can also be used as a quick detailer between RejeX treatments.
Aero-Glide is waterless dry wash is specially formulated with a blend of deep cleaners and light oxidation removers to provide a true one-step cleaning, detailing and polishing solution that leaves a high gloss protective finish on aircraft and other vehicles. Aero-Glide's hard protective coating reduces surface friction and exhaust stains.
Among the highest regarded vehicle care products of our time, RejeX is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. This very thin film – less than a micron thick – prevents stains and adhesion of common contaminants such as jet turbine exhaust, bugs on leading edges, oil, belly grime, etc. RejeX also provides unmatched protection against UV damage. Read RejeX Testimonials here, including a chilling account of how one pilot credits RejeX with saving his life.
Tough Guy is a concentrated, water-based hand cleaner formulated to clean the toughest grease and grime while at the same time promoting healthy skin care. Tough Guy liquefies to remove stubborn industrial soils, grease, oil, tar, ink, paint and more.