KILLS RUST AND CORROSION
WORLD'S GREATEST LUBRICANT, PENETRANT & ANTI-SEIZE
SAFE ON ELECTRONICS
CorrosionX® is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! Although it may look similar to other oil-based anti-corrosion sprays, CorrosionX utilizes revolutionary Polar Bonding™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. CorrosionX actually disrupts rust and corrosion on the molecular level (displacing it from the metal surface and keeping it from spreading), and provides long-term protection against rust and corrosion on any metal surface.
CorrosionX is the only product readily available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement MIL-PRF-81309H.
Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum, which are highly resistant to oxidation. CorrosionX also has a dielectric characteristic, so not only is it safe on electronics, CorrosionX shuts down electrolysis between dissimilar metals. Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, gensets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments.
A Breakthrough Lubricant
CorrosionX's unique formulation offers a multitude of advatages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants.
Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication.
An Unbeatable Penetrant
CorrosionX penetrates faster and further than any penetrating fluid you've ever used! Corroded or rusted nuts, bolts or fittings can usually be disassembled within minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service.
Safe On Electronics
Water and electronics don't mix. Until now, there haven't been many options for protecting or restoring electronics from moisture intrusion. CorrosionX's unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals, and a mission critical product for drones and all Remote Control hobbyists.
Minimal Environmental Impact Product
The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is gentler on you, your equipment and the environment.
National Stock Numbers
- CorrosionX 6 oz aerosol NSN 8030-01-437-5222
- CorrosionX 16 oz aerosol NSN 8030-01-437-5227
- CorrosionX 16 fl oz trigger spray NSN 8030-01-437-5687
- CorrosionX 1 gallon NSN 8030-01-437-5224
- CorrosionX 5 gallon NSN 8030-01-437-5233
- CorrosionX 30 gallon NSN 8030-01-437-4114
- CorrosionX 55 gallon NSN 8030-01-438-4112
Trigger Spray Spray Pattern (stream only)
Learn More | Brochure | Product Data SheetCustomer Reviews
Based on 2 reviews
Write a review
Orders containing standard (non-custom) items usually ship within 1-2 business days. You will receive tracking notification either from UPS or the U.S. Postal Service (through stamps.com or endicia.com) when your order ships.
If your order contains an aerosol, PLEASE select UPS Ground as your shipping method.
Related Product
$0.00
This is a classic 2" x 4" door / window sticker for your store or place of business. Proudly announce that your store carries the world's finest corrosion inhibitor, lubricant and penetrant product on the planet. Free with any 1 case or larger order.
Soldout
$13.49
MULTI-SURFACE INTERIOR / EXTERIOR SPRAY AND WIPE FOAMING CLEANER
5 Star Foam™ rates as the absolute finest foaming cleaner in the industry! 5 Star Foam is for use on interior smudge marks, nicotine stains, oily fingerprints and food stains. On aircraft exteriors, 5 Star Foam will effectively clean carbon exhaust, oil and bugs. It can also be used on vinyl, leatherette, plastic, sinks, enameled, varnished and similar surfaces. 5 Star Foam was designed specially for hard to remove grease and soil unaffected by other cleaners. Its clinging foam permits long-lasting contact with irregular, as well as plain, surfaces to be cleaned. Its high pressure spray enables it to reach hard-to-get-to trouble spots.
Meets or exceeds the scope and performance requirements of MIL-C-878937 Type II
Passes ASTM-F-484 Type A Stress Crazing Of Acrylic Plastic
Suitable for use on BOEING LEXAN 9600 and GE-MR5 LEXAN
Passes ASTM F502, Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
RECOMMENDED FOR USE ON:
- Aircraft and boat exteriors
- Tile
- Sinks
- Tubs
- Stainless Steel
- Vinyl
- Plastic Surfaces
$10.95
CARPET SPOT AND STAIN REMOVER
5 Star Stain Remover™ was formulated to be a powerful, easy-to-use carpet and cloth stain remover. It's the quick and easy solution for removing grease, oil and ground-in dirt.
- May be used on most types of carpet
- Excellent for pre-treating stains prior to carpet shampooing
- Add to your existing carpet shampoo to boost cleaning power
- Contains biodegradable surfactants
- Will not harm plastic
RECOMMENDED FOR USE ON:
- Car and truck carpet
- Commercial carpet cleaning
- Pretreating high traffic area soils
- Removing grease and oil spots
- Tough stains like red wine and cofee
16 fl oz
1 gallon
5 gallon
$21.95
16 fl oz
1 gallon
5 gallon
ONE-STEP DRY WASH, POLISH & FRICTION REDUCER
Aero-Glide™ waterless dry wash is specially formulated with a blend of deep cleaners and light oxidation removers to provide a true one-step cleaning, detailing and polishing solution that leaves a high gloss protective finish on aircraft and other vehicles. Aero-Glide's hard protective coating reduces surface friction and adhesion of exhaust stains.
Meets Commercial Aviation Certifications
ASTM F484-008 (2013)
ASTM F519-13
AMS 1650C
ASTM F502-08 (2013)
BOEING D6-17487 Rev. P
| Tech Sheet |
1 gallon
20 gallon
30 gallon
55 gallon
$25.95
1 gallon
20 gallon
30 gallon
55 gallon
ALUMINUM CLEANER, BRIGHTENER AND OXIDATION REMOVER
ALuma Brite™ is a special formulation of surface cleaners and acid designed to restore aluminum to a bright, clean appearance.
Features
- Removes oxidation to restore a bright, clean aluminum finish
- Controlled rate of etching helps prevent streaking when working with large aluminum surfaces
- Easily removes concrete, exhaust soot and road film
- High foaming / clean rinsing formula.
Tech Sheet | SDS
55 gallon
265 gallon tote
$1,999.80
55 gallon
265 gallon tote
Asphalt Release agent prevents asphalt from sticking to beds of asphalt trucks and other equipment.
1 gallon
5 gallon
30 gallon
55 gallon
$39.95
1 gallon
5 gallon
30 gallon
55 gallon
THE ECONOMICAL AND SAFE WAY TO REMOVE ASPHALT AND TAR
Asphalt Remover is a bio-based formula made using natural plant oils to create a product that offers all the cleaning power you need without resorting to the harsh, environmentally hazardous chemicals used by most commercial tar and asphalt removers.
Features
- Bio-based
- Nonhazardous
- Contains no chlorinated or hydrocarbon-based solvents
- Environmentally responsible and biodegradable
- Nonflammable (flash point more than 250° F)
- Can be diluted up to 5:1 with water (one part Asphalt Remover to five parts water) to clean lighter accumulations of asphalt and tar.
| Tech Sheet |
1 gallon
5 gallon
20 gallon
30 gallon
55 gallon
$89.75
1 gallon
5 gallon
20 gallon
30 gallon
55 gallon
FAST-ACTING, ENVIRONMENTALLY- AND EQUIPMENT-SAFE WAY TO CLEAN ASPHALT AND TAR
Asphalt Remover Citrus is a bio-based formula made from natural plant oils to create a product that offers all the cleaning power you need without resorting to the harsh, environmentally hazardous chemicals used by most commercial tar and asphalt removers. Asphalt Remover Citrus is similar to regular Asphalt Remover, except that it contains a higher concentration of citrus additives for faster cleaning and is up to even the most difficult cleaning challenges, including thicker accumulations of tar and asphalt.
Features
- Bio-based
- Nonhazardous
- Contains no chlorinated or hydrocarbon-based solvents
- Environmentally responsible and biodegradable
- Nonflammable (flash point more than 250° F)
- Can be diluted up to 5:1 with water (one part Asphalt Remover Citrus to five parts water) to clean lighter accumulations of asphalt and tar
1 gallon
5 gallon
55 gallon
$39.99
1 gallon
5 gallon
55 gallon
BARNACLE-X is the only biofouling dissolver / remover whose chemistry targets the complete range of issues associated with both fouling organisms and the dissolved minerals contained in fresh, brackish and seawater. BARNACLE-X not only dissolves calcium- and silicone dioxide-based shells and exoskeletons, it also breaks down mineral accumulations and the bio-adhesives secreted by barna- cles, mussels and limpets, so that those organisms can be more quickly and easily removed from vessel hulls and running gear.
- For use on both freshwater and saltwater systems and hulls
- Dissolves the calcium and silicone dioxide shells and exoskeletons of macrofouling organisms such as barnacles, mussels, limpets and coral, as well as microfouling organisms such as bacteria and algae that accumulate on heat exchanger surfaces.
- Contains the natural release agent for the bio-adhesives secreted by barnacles and mussels.
- Reduces corrosion caused by restricted flow, the anodic condition created by decreased oxygen below the fouling layer, and the metabolic by-products of bacteria.
- Safe on bronze, copper, gelcoat and marine paints when used as directed
THE ONLY BARNACLE BUSTER PRODUCT WITH TRI-ACTION
- The Best Value: Dilutes up to 5:1 with water
- Dissolves calcium- and silicone-based shells and exoskeletons
- Targets the bio-adhesives that barnacles and mussels use
to attach - Dissolves algae, coralline and mineral scale
TYPICAL APPLICATIONS
- Cleaning heat exchangers on water-cooled engines
- Cleaning heat exchangers on marine air conditioners
- Clearing restricted pipework and valves
- Removing macrofouling (ex: barnacles, mussels and limpets) and other hard fouling from boat and ship hulls and running gear
1 gallon
5 gallon
20 gallon
30 gallon
55 gallon
$37.65
1 gallon
5 gallon
20 gallon
30 gallon
55 gallon
REPELS CONCRETE, MORTAR, GROUT, GUNITE & PAINT
Barrier Shield™ is a coating designed to repel concrete, mortar, grout, gunite, paint, road and industrial grime from concrete trucks and other roadworking equipment. Barrier Shield attaches electrostatically to both painted and unpainted surfaces. Dilutable with water (usually 2 parts water to 1 part product), Barrier Shield is economical to use, and one application lasts for an entire day.
Features
- Saves hours of cleanup time
- Helps protect vehicle finishes
- Quick, easy and economical
- One application lasts for an entire day
- Nonhazardous
1 gallon
5 gallon
20 gallon
30 gallon
55 gallon
$39.99
1 gallon
5 gallon
20 gallon
30 gallon
55 gallon
READY-TO-USE CONCRETE REPELLENT AND FORM RELEASE
BIO SLIDE™ is a premium quality concrete repellent that prevents concrete from adhering to ready mix trucks and roadworking equipment. BIO SLIDE also facilitates easy removal of concrete structures from concrete forms – minimizing voids, bug holes and build-up. Designed to be applied with a single thin coat, BIO SLIDE is non-staining, reduces waste and increases productivity.
Features
- Advanced formula
- Easy application
- Non-staining; will not stain or discolor
- No unpleasant odor
- Will NEVER clog spray equipment
- Does not wash off with water
Helps ensure the highest quality architectural concrete and decorative concrete finishes by minimizing voids and bug holes Great for concrete ready mix trucks, pumpers, screeds and other paving equipment to prevent adherence and build-up of concrete.
| Tech Sheet |